All Paths Down on Esxi/HPE setups

So we ran into an issue where a clients server(VM running on esxi 6.0) just went offline. We logged in and found an All Paths Down situations but the datastore and all hardware was still alive and kicking. Turns out HPE is already aware of the issue and will send a replacement part at no charge and overnight. There is a USB sd adaptor plugged into the motherboard that is actually at fault. Read here: https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c05369827


On an HPE ProLiant server running VMware ESXi and utilizing an HP Dual 8GB microSD Enterprise Midline USB Kit, the HPE microSD card carrier solution may experience memory corruption, which may lead to an all paths down situation. 

Comments

Post a Comment

Popular posts from this blog

Old Bike Pics from the first wreck.

Image
It was a hot morning in August 2015. I opted to not wear my jacket or gloves but I did wear my helmet, boots, and jeans. As I was exiting Interstate 20 by the West Loop 250 entrance, the truck in front of me had no tail lights working and had slammed on his brakes to avoid hitting someone who ran the yield sign on the service road. Going from 75 down to a dead stop on a bike isn't too hard, but throw in a slick patch on the road, and a semi who blew past me as I exited onto the off ramp at the same time and my bike immediately started to slide. I aimed for the caliche and the next thing I knew I was on my back looking up. Out of the peripherals to the left I saw my bike bouncing end over end and I barely had enough time to scream "F**K!" as the tail end slammed onto my helmet and the bike stood on it's end on my head. A pair of safety glasses were the only thing that saved my skull from getting brained by whatever piece of metal to which I can only assume was the pas
Read more

Creating a RaspberryPi 3b+ Home Assistant Screen

 Items used: 1. Raspberry Pi 3b+ 2. 32 Gig Micro SD 3. Raspberry Pi 7" Touch Screen Display - https://www.amazon.com/gp/product/B0153R2A9I 4.  SmartiPi Touch 1 - Case - https://www.amazon.com/gp/product/B01HV97F64 5. FullPageOS 6. Notepad++(DO NOT USE REGULAR NOTEPAD) Download the latest build from here: http://unofficialpi.org/Distros/FullPageOS/ Use the Pi SD Card Imager of your choice to flash the image to the sd card. After it images, before you boot edit the following: In the config.txt file do the following: Under RPI4: comment out "dtoverlay=vc4-fkms-v3d" under rpi4 Under All: comment out the very last line and uncomment "dtoverlay=vc4-fkms-v3d" Save and close that config file. To configure wifi if you are going that route: Open /boot/fullpageos-wpa-supplicant. txt in a text editor. Locate the WPA/WPA2 secured section in the text file. Uncomment network={ to } (4 lines) by removing the # signs from the beginning of each line. Replace put SSID here with y
Read more